Choose Image Exports for Embedded Displays and Pixel Pipelines
A file is useful only when the receiving decoder agrees with its layout. Start with the application or device specification, then choose a format, dimensions, alpha handling and byte order. The byte counts below are mathematical examples; they are not compression benchmarks or claims about a particular display.
Convert Image to Raw RGB565 →Try a reproducible example
300 × 200 × 2 = 120,000 bytes of raw RGB565. The little-endian file has no header: the receiving program must know dimensions and byte order. The PNG preview shows the reduced 5/6/5-bit colors.

300 × 200 px · 71,657 bytes
Download this file ↓
300 × 200 px · 120,000 bytes
Download this file ↓Processing settings
- Byte order
- Little-endian (low byte first)
- Transparency background
- #ffffff
Created by Picvelio on 12 November 2026 from original synthetic artwork using the same code as the tools. Download the input, open the saved settings, then choose that file. File sizes are measured bytes; results with other inputs or browsers can differ.
Open these settings →1. Choose a decoder before choosing a lossless format
QOI is a compactly specified lossless pixel format, not a drop-in replacement for PNG on every website. This exporter writes an RGBA header and encodes runs, a recent-color index and small RGB differences. Its lossless promise applies to the decoded 8-bit RGBA pixels supplied by the browser. It does not recreate source metadata, higher bit depth or RGB information the browser has already discarded under transparent pixels.
Use QOI when the destination has a QOI decoder and you want that pixel representation. Download it, open it with the actual receiving tool and compare dimensions and alpha with the PNG preview. Do not assume it will be smaller than PNG: patterns determine the encoded length. Keep PNG or another accepted format for ordinary browser display, and retain the original separately if its metadata matters.
Convert Image to QOI →2. For RGB565, agree on every byte before transfer
RGB565 stores red in 5 bits, green in 6 and blue in 5. Picvelio first composites transparency on the chosen background, rounds each channel to those levels and writes two bytes per pixel, from left to right and top to bottom. There is no header, row padding or stored width. A 300 × 200 image therefore uses 300 × 200 × 2 = 120000 bytes. Keep width, height and byte order alongside the file; the reader cannot infer them from these bytes alone.
A pure red pixel has the word 0xF800. Little-endian writes 00 F8, while big-endian writes F8 00. Confirm that the library expects RGB565 rather than BGR565 and whether it swaps bytes during transfer. The preview shows the quantized RGB values, not a simulation of the display panel. Check smooth gradients for banding and transparent edges against the selected background before exporting the final size.
Convert Image to Raw RGB565 →3. Use PAM or farbfeld for explicit channel data
PAM starts with a readable P7 header followed by binary samples. RGBA output declares RGB_ALPHA, depth 4 and Maxval 255; grayscale plus alpha uses GRAYSCALE_ALPHA and depth 2. Alpha is last and not premultiplied. A 300 × 200 RGBA image contains 240000 sample bytes plus the header. The grayscale choice uses a weighted sum of encoded sRGB values, not a linear-light luminance measurement. This exporter declares its sRGB sample variant and does not convert to BT.709 transfer encoding.
Farbfeld instead has a fixed 16-byte header and four big-endian 16-bit channels per pixel. The same size occupies 16 + 300 × 200 × 8 = 480016 bytes. Each decoded 8-bit channel is multiplied by 257: 128 becomes 32896, or hexadecimal 0x8080. Expanding the container to 16 bits does not recover lost tonal precision, create HDR or restore an ICC profile. Choose either format only when the processing pipeline supports it and budget for the uncompressed size.
Convert Image to PAM →4. Read XBM as a row-packed one-bit image
XBM is C source containing dimensions and a byte array. The exporter composites transparency on white, applies a threshold and optionally inverts the decision. In this X11 layout the leftmost pixel is bit 0, and a set bit represents black in the preview. Each row starts a new byte sequence: the stride is ceil(width / 8). A 9 × 16 bitmap needs 2 × 16 = 32 packed pixel bytes, although the surrounding text makes the downloaded file larger.
Check whether the target expects least-significant-bit first, the same black/white polarity and row padding. Some display APIs use a different one-bit layout even when their buffers also contain bytes. The output names are picvelio_width, picvelio_height and picvelio_bits; rename them when including multiple assets in one program. This threshold export does not dither. If needed, create the desired black-and-white pattern first, then export it and verify thin strokes at the final dimensions.
Convert Image to XBM →5. Use SVG mosaics when visible blocks are the intended design
An SVG mosaic represents each grid cell as a rectangle, not as a traced contour. Choose 8, 16, 32 or 64 cells on the longest side; the aspect-ratio grid has at most 4096 rectangles. Each cell uses alpha-weighted mean encoded RGB and mean alpha, and fully transparent cells are omitted. The exporter generates only numeric rectangle geometry and colors, without scripts, original markup or external image references.
This is useful for a deliberately simplified block illustration, but it loses details and may be larger than a compressed raster. It is not a way to turn a photograph into faithful resolution-independent outlines. These Lab files also do not copy the source ICC profile; the PNG preview represents decoded sample values rather than color-managed behavior on a device. Test the actual output in the receiving renderer, and keep a raster alternative when compatibility or exact pixels matter.
Convert Image to SVG Mosaic →Before you use the result
- The receiving software supports the actual format, not only the filename extension.
- Width, height, row order, channel layout and byte order match the importer; RGB565 dimensions are stored separately.
- Alpha is preserved where supported, or composited on the intended background before a format discards it.
- Memory and file-size estimates include headers or textual source when relevant; raw RGB565 is exactly two bytes per pixel.
- The saved file has been opened in the destination, and the original is retained for metadata, profiles and future edits.